SBC CHEVY ENGINE, STROKER ENGINES, VORTEC HEADS - (HOUSTON for sale in New Hampshire

SBC CHEVY ENGINE, STROKER ENGINES, VORTEC HEADS - $1500
Expired ad
Buy with:  PayOn Delivery
Price:  $1,500
Edit your ad
Report abuse

Category:  Car parts

Other: The ad is older than 3 months.

Address:  New Hampshire

TO ALL SCAMMERS - I ONLY ACCEPT THE FOLLOWING FORMS OF PAYMENT - USPS MONEY ORDER, CASH, OR PAYPAL, so do not waste my time with your crap
I have been getting alot of questions over this engine. If this build up is not exactly what you are looking for, feel free to let me know what you want or would like changed. I am flexible in this build. For example, if compression is to hi, I can change that, or is it to low, I can change that too. Cam to small, can change that. We can build it, 305, 307, 327, 343 stroker, 350, 383 stroker, 396 stroker, 400, 421 stroker, 434 stroker. Stroker motors will cost more due to variables like forged cranks and rods and pistons cost. Let me know how I can help you with this build. I know we can work something out to get you the engine that fits your needs. The $1500 price is a starting point. Your particular build may be less or more.
This is a typical 375 to 450 HP engine depending on your particular engine build, your build might be slightly more than this example
as most of your know, the 400 SBC is becoming a very rare item to find in buildable condition, so the price will reflect this additional cost
SBC CHEVY Engine(350 or 383 or 400(400 if we have one)(383 400 slightly more in price)- hypereutectic flat top pistons,
cam from .445 lift to .533 lift(hydraulic flat tappet) your choice ,
Vortec heads 64 cc chambers( 906 or 062 castings depends on what we have in stock at the moment),
vortec dual plane intake with center section modified for better breathing in the higher RPM range.
HP range should be between 350 to 425 depending on your particular build
Do you have a block, we can build it for a little less with your block
moly rings,
HV oil pump,
hardened oil pump shaft with steel pinned coupler, not the plastic coupler,
oil galley plugs converted to screw in plugs, not pressed fit plugs
oil passage through rear main cap has been enlarged and relieved for better oil flow.
double row timing chain, balancer (new), flex plate(new), oil pan and timing cover(new) included.
PICTURES BELOW ARE EXAMPLES OF SOME OF THE PARTS USED
The $1500 price is for the complete assembled engine,
oil pan to intake,
balancer to flex plate,
bolt ons like valve covers, carb, distributor, plugs, wires, starter, water pump, fuel pump are your responsibility
PLEASE NOTE - THIS ENGINE WILL BE BUILT FOR YOU, it is not done now, allow 1 week turn around(up to 3 weeks for stroker motors) for completion
Now if this assembly is not exactly what you want,
we can upgrade items like heads, intake, crank, pistons, rods, change the block to other SBC block, etc...
They will be extra of course. We can build it how you want it.
We also do 350 , 377, 383, 400, 406, 421, 434 engine builds.
I will accept $1000 down and the remainder in a short time period from the initial payment.
Item can be picked up when paid in full.
All payment are non refundable, If you make a payment, the item is booked for your purchase.
SO PLEASE MAKE SURE YOU WANT IT.
We also do basic engine build too. just some basic pricing for more common engines. Call with your needs
305 or 350 chevy non roller - $625
305 or 350 chevy roller -$750
302 ford - $ 600
302 ford roller - $725
Call with your needs or email us, we are here to help you get what you want, not what we think you want
Mild to Wild, stock and custom, stroker motors etc...

amperfheads@comcast.net
ask for Jonathan

Location: HOUSTON

Similar ads:
Check engine light on? I come to you and diagnose it with scanner!I will diagnose and erase your Check Engine or Service Engine Soon light! $10-20 949-335-8787
I can scan your car's computer and tell
$10 - Check engine...
Should work for 2003-2006 Chevy / GMC 4.8, 5.3 & 6.0L Vortec engines.
Call Wade @ 720-297-7070 if interested.
Thanks for looking!
Location: Aurora
$200 - Hypertech...
Copyright © 2014 Americanlisted.com, All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.