This is an Airco 225amp AC Arc welder with 115v DC generator, model 2ADG-AMP-A
The engine is a 12.9hp twin cylinder Onan model CCK-S/435F rope start
Everything works like it should and it has just received a complete tune-up including:
sandblasting and repainting all of the covers
new high temperature paint on the engine block, heads, intake, and exhaust
new intake and exhaust gaskets
new points and condenser
carburetor torn down, soaked and all of the gaskets replaced
new spark plugs and wires
oil flushed and replaced
air filter converted from the oil bath type to a standard lawnmower paper filter
(I still have the old oil bath filter you can have if you like)
fuel tank flushed and fuel filter bowl and screen replaced
all electrical connections on both the engine and welder removed, cleaned, and replaced if necessary
welder and generator brushes cleaned and moving freely
new plug-in style connector for the welding leads
probably some other things I'm forgetting right now
The engine starts easily, usually on the first or second pull with no smoking and has no trouble powering the welder even at the highest settings. The oil pressure is usually about 30psi once it's warmed up.
Please note the leads shown in the pictures do not come with the welder. They will be available for you to try it out if you want but they don't come with it.
Asking $800 obo.
Email or call
if you are interested or would like more information.